Customized mold making process of bone china advertising cup

Customized molding process to promote bone china maker cups:

 Painting-> Dividing line-> Gate-> Refueling-> Mixing plaster slurry-> Injecting plaster slurry-> Repairing mold-> Remove fan cover-> Creating sleeve

1. Customized painting of bone china cups: Polish the varnish adjusted to the finished mold to facilitate model remake.

2. Customized dividing line for bone china cups: Reasonably draw the dividing line of the model on the painted mold.

3. Customized gate of bone china cup: When rotating the first model, the non-rotating part must first be built with the mud gate.

4. Customized oil for bone china cups: Before pouring the model, brush a layer of oil on the mold to facilitate rotation.

5. Customized bone china cup and gypsum slurry: Pour an appropriate amount of water into a gypsum bucket, add gypsum powder in proportion to the water, put in a slurry of a certain consistency and stir.

6. Gypsum slurry injection customized for bone china cups: Pour the mixed gypsum slurry into a mold ready to turn the gate over.

7. Customized repair of bone china cup: After the plaster slurry has solidified, smooth the outside of the plaster mold if necessary.

8. Uncover Customized Bone China Cup Fans: Follow the steps above to complete a set of models for each fan.

9. Customized set of bone china cups: Create a jacket using the first set of rotating models. This allows you to duplicate the same model in large numbers.